If you were able to use margin in the vendor design documents and you did not have to change any site Reactivity Management Related documents or code then it would be a Level 6 since no changes to site documents occurred.
If you had to change a site Reactivity Management Related Document or code then it would be a Level 3.10.
Howard C Crawford TMI Reactor Engineering Manager 717-948-8412 howard.crawford@exeloncorp.com
Safety in word and deed Trust we build together Ownership that makes all of us accountable Respect each other, our work, and the environment Initiative drives us to better serve
From: pwrrm@retaqs.com [mailto:pwrrm@retaqs.com] On Behalf Of Gibson, Kara A. Sent: Thursday, February 28, 2013 10:52 AM To: 'pwrrm@retaqs.com' Subject: [Pwrrm] Vendor File Error and Reactivity Managment SL
Prairie Island was just made aware that we received a file from the vendor for our flux map processing code that could impact our margin to the Fq TS limit. This error applies to the current operating cycle on one unit and a past cycle on the other unit. An assessment was done and the current operating cycle has enough margin to the TS Fq limit given the error. A past assessment needs to be performed for all the flux maps in the current operating cycle and all the flux maps in the past cycle.
Two questions:
If it is found that there is no impact on the Fq margin for past flux maps in the current operating cycle given the error should this still be classified as a level 3.10? The incorrect file was used, but without any violation of TS limits.
For the previous cycle, would this event still be a level 3.10 if no TS limits were exceeded given the error? The Technical basis document, although not official, does state that the "SL of an issue is based on time of discovery and the impact of the technical error if it is implemented."
Your input would be appreciated.
Thanks,
Kara
Kara Gibson
Xcel Energy | Responsible By Nature
Reactor Engineer
1717 Wakonade Dr. East Welch, MN 55089
P: 651.388.1121 x4719 F: 612.330.5743
E: kara.gibson@xenuclear.com mailto:kara.gibson@xenuclear.com
Please consider the environment before printing this email
----------------------------------------- ************************************************** This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. **************************************************