Beaver Valley response
1. Currently utilize Westinghouse F-5 Field Specification recommended bridge-type core reload 2. During core verification we will just visually look for any unusual gaps using an underwater camera, but no equipment is used to physically measure the gaps. 3. N/A
Anthony (A.R.) Burger Supervisor, Reactor Engineering FENOC - Beaver Valley Power Station Phone: (724) 682-4108 Cell: (724) 601-3224 FAX: (724) 682-4250 Email: aburger@firstenergycorp.com
From: Jeremy A Custer jeremy.a.custer@dom.com To: "pwrrm@retaqs.com" pwrrm@retaqs.com Date: 06/23/2011 09:53 AM Subject: [Pwrrm] Core loading and gap checks Sent by: pwrrm@retaqs.com
All,
At Kewaunee, we?re considering a change from the standard bridge pattern of core on-load to a modified crescent. I have the following questions for the industry: 1. What core loading pattern do you use? 2. Do you use software/equipment to physically measure the gaps between assemblies? 3. If so, what is the software/equipment?
Thank you in advance for any information you can offer.
Jeremy Custer Reactor Engineer Kewaunee Power Station Phone: 920-388-8778 Pager: 920-305-0119
CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you._______________________________________________ PWRRM mailing list PWRRM@retaqs.com http://www.keffective.com/mailman/listinfo/pwrrm
----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.