We have not implemented Appendix K using ultrasonic
flow measurement for feedwater as of yet.
Our Question(s)
1) What are other plants goals/expectations for
maintaining power level? (=/- MW or goal); How easy is it to maintain?
Is there a band within which you operate?
2) How is your secondary calculation performed? (Averaging Inputs, Instantaneous values,
combination) Is it a module
or program on
you plant computer or is it an off-line routine?
3) Are your temperature and flow transmitters set specifically
for this calculation? (dampening or bias settings)
4) Are any of your control loops (Feedwater) used in
the secondary calorimetric calculation?
5) Have you had any issues related to power swings or
related to your secondary calorimetric?
J. E. Willett
"Only
those who will risk going too far can
possibly find out how far one can go."
T.S.
Eliot (1888-1965)
----------------------------------------------------
Joseph E. Willett,
P.E.
Principal Reactor Engineer, Nuclear Operations
E-mail: jwillett@oppd.com OR Joseph_Willett@hotmail.com
Omaha Public Power District Phone:
P.O. Box 399
Mail Station: FC-1-1 Plant
This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. |