Jeremy,
Tim said you had change locations. Good for you. Here are the answers to your questions.
1. What core loading pattern do you use? See attached files reload or offload and the core map
2. Do you use software/equipment to physically measure the gaps between assemblies? NO. Our procedure utilizes the mast camera to visually verify gaps. If you would like a copy of the attachment, I can send it.
3. If so, what is the software/equipment? N/A
J. E. Willett ---------------------------------------------------- Joseph E. Willett, P.E. Principal Reactor Engineer-Fuel Nuclear Operations Division E-mail: jwillett@oppd.commailto:jwillett@oppd.com%20 Omaha Public Power District Phone: (402) 533-7213 Fort Calhoun Station Pager: (402) 561-3899 9610 Power Lane FAX: (402) 533-6747 Blair, NE 68008 Mail Station: FC-1-1 Plant ---------------------------------------------------- -------- From: Jeremy A Custer [mailto:jeremy.a.custer@dom.com] Sent: Thursday, June 23, 2011 8:52 AM To: pwrrm@retaqs.com Subject: [Pwrrm] Core loading and gap checks
All,
At Kewaunee, we're considering a change from the standard bridge pattern of core on-load to a modified crescent. I have the following questions for the industry:
4. What core loading pattern do you use?
5. Do you use software/equipment to physically measure the gaps between assemblies?
6. If so, what is the software/equipment?
Thank you in advance for any information you can offer.
Jeremy Custer Reactor Engineer Kewaunee Power Station Phone: 920-388-8778 Pager: 920-305-0119
CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
---------------------------------------------------------------------- This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.