Surry is trying to answer a question this morning regarding power level indications and uncertainties.
We are stating that within a certain confidence level, that the calorimetric calculation will produce a reactor power output (at RTP) from 98.8 to 101.2% with the rightly calibrated process instrumentation in the calorimetric program (App K). Half the time the operating power will be above 100%, half the time it will be below 100%. The opposing opinion is that if we have a 1.2% RTP uncertainty that we operate at or below 98.8% so as to not exceed RTP. The uncertainties in question relate to the plant computer-none of the redundant indications indicate higher than RTP (most notably delta Ts). It is also noted that we were told that no other site operates the way we are with regard to uncertainties.
Can you please tell us how your site operates with regard to uncertainties and your RTP?
Thank you in advance.
Adina LaFrance
The significant problems we face cannot be solved at the same level of thinking we were at when we created them. -Albert Einstein
Nuclear Analysis & Fuel Reactor Engineer Surry Power Station Email: Adina.K.LaFrance@Dom.commailto:Adina.K.LaFrance@Dom.com Phone: 757-365-2658 Pager #: 4290
CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.