See Beaver Valley responses below.
Anthony (A.R.) Burger Supervisor, Reactor Engineering FENOC - Beaver Valley Power Station Phone: (724) 682-4108 Cell: (724) 601-3224 FAX: (724) 682-4250 Email: aburger@firstenergycorp.com
From: ddgoff@aep.com To: pwrrm@retaqs.com Date: 11/21/2011 01:55 PM Subject: [Pwrrm] fuel inspection Sent by: pwrrm@retaqs.com
DC Cook Reactor Engineering is looking at possible extraneous work to remove from the refueling outages.
Cook is a PWR which performs a fuel core offload and reload.
Currently our Quality Control department performs a 4-sided camera inspection of the assemblies as they leave containment on unload and as they enter containment on reload.
We are looking at reducing the inspections to occur only on unload, eliminating the reload inspection.
My Questions:
What organization at your plant performs the fuel inspections? Response: Reactor Engineering and Fleet Fuels personnel
Do you perform the inspection on Unload? Response: Yes
Do you perform the inspection on Reload? Response: We inspect the top of all the fuel scheduled to be reloaded in the Spent Fuel Pool prior to reload.
What method do you use to perform the inspection, 4 cameras, 1 camera, binoculars, eyeball, etc.? Response: Implementing a 4-sided in-cavity camera system that inspects the fuel as it is pulled up from the core into the manipulator crane mast. We demonstrated use of a single-sided camera during previous outage with good results. It also sees the bottom nozzle, but at an angle, not directly below. Cameras sit on cavity floor just outside the vessel 90 degrees apart.
thanks
Glen M Bradham, 269-465-5901 X1538 gmbradham@aep.com_______________________________________________ PWRRM mailing list PWRRM@retaqs.com http://www.keffective.com/mailman/listinfo/pwrrm
----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.