Beaver Valley uses BEACON-OLM (On-line Monitoring) and has not transitioned to TSM. I would not think that you would need to run 2 versions unless you were upgrading to BEACON 7 versus BEACON 5 or 6.

Anthony (A.R.) Burger
Supervisor, Reactor Engineering
FENOC - Beaver Valley Power Station
Phone: (724) 682-4108
Cell: (724) 601-3224
FAX: (724) 682-4250
Email: aburger@firstenergycorp.com

From: "Gibson, Kara A." <Kara.Gibson@xenuclear.com>
To: "'pwrrm@retaqs.com'" <pwrrm@retaqs.com>
Date: 02/02/2012 12:29 PM
Subject: [Pwrrm] BEACON TSM transition
Sent by: pwrrm@retaqs.com

For those of you that currently use BEACON-TSM, what was your transition plan for going from your old system to BEACON-TSM? Did you run both systems in parallel for a certain amount of time? We currently use BEACON-Incore and are wondering if we need to run an Incore model on a separate computer at the same time we are running the TSM model on the new computer.

Thank you in advance for your input.

Kara Gibson
Xcel Energy | Responsible By Nature
Reactor Engineer
1717 Wakonade Dr. East Welch, MN 55089
P: 651.388.1121 x4719 F: 612.330.5743
E: kara.gibson@xenuclear.com
________________________________________________
XCELENERGY.COM
Please consider the environment before printing this email
_______________________________________________ PWRRM mailing list PWRRM@retaqs.comhttp://www.keffective.com/mailman/listinfo/pwrrm
----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.