Surry Power Station has Cameron UFMs installed at our plant and were wondering if any other sites have seen ambient temperature changes cause UFM Transducers to decouple (i.e. gains increase and Signal to Noise ratio decrease). The temperature change seen at Surry was approximately 30 degrees in 20 minutes.
Daniel Agnew Reactor Engineer Nuclear Analysis & Fuels, Surry Power Station
Dominion Generation Phone: 757-365-3183; Internal: 8-798-3183 E-mail: Daniel.Agnew@dom.com
CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
Fort Calhoun Station does use UFM yet.
J. E. Willett ---------------------------------------------------- Joseph E. Willett, P.E. Principal Reactor Engineer-Fuel Nuclear Operations Division E-mail: jwillett@oppd.commailto:jwillett@oppd.com%20 Omaha Public Power District Phone: (402) 533-7213 Fort Calhoun Station Pager: (402) 561-3899 9610 Power Lane FAX: (402) 533-6747 Blair, NE 68008 Mail Station: FC-1-1 Plant ---------------------------------------------------- -------- From: Daniel Agnew [mailto:daniel.agnew@dom.com] Sent: Thursday, December 08, 2011 1:14 PM To: pwrrm@retaqs.com Subject: [Pwrrm] Question about UFM
Surry Power Station has Cameron UFMs installed at our plant and were wondering if any other sites have seen ambient temperature changes cause UFM Transducers to decouple (i.e. gains increase and Signal to Noise ratio decrease). The temperature change seen at Surry was approximately 30 degrees in 20 minutes.
Daniel Agnew Reactor Engineer Nuclear Analysis & Fuels, Surry Power Station
Dominion Generation Phone: 757-365-3183; Internal: 8-798-3183 E-mail: Daniel.Agnew@dom.commailto:Daniel.Agnew@dom.com
CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
---------------------------------------------------------------------- This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.