Respvr June 2006

respvr@retaqs.com

3 participants
3 discussions

RE: [Respvr] Start Up sequence
by MCKINNEY, MICHAEL R 07 Jun '06

07 Jun '06

ANO-1 has non-trippable axial power shaping rods. ANO-1 also unscrews the rods, vs jacking them out. -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of ALDAY, CLINT L Sent: Wednesday, June 07, 2006 12:26 PM To: RE Supervisors Subject: RE: [Respvr] Start Up sequence Non-trippable rods? Clint Alday 504-739-6331 -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of POHL, MATTHEW H Sent: Monday, June 05, 2006 7:22 PM To: RE Supervisors Subject: RE: [Respvr] Start Up sequence Fort Calhoun normally dilutes to within 100 ppm of ECC boron, then withdraws Shutdown Banks A & B, dilutes the remaining 100 ppm to ECC boron, withdraws the non-trippable rods, and then withdraws the Reg Rods. Matt Pohl (402)533-6820 -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of Hugh_E_McKenney(a)dom.com Sent: Thursday, May 18, 2006 8:19 AM To: respvr(a)retaqs.com Subject: [Respvr] Start Up sequence RE Supervisors, Does your plant normally start up (non RFO) by withdrawing shutdown banks first, then diluting the RCS to the estimated critical rod position (Cb) then withdrawing control rods to critical? or Does your plant normally start up by first diluting the RCS to the estimated critical rod position (Cb), then withdrawing shutdown banks, then withdrawing control rods to critical? Thanks Hugh McKenney Dominion Resources Services, Inc. Reactor Engineering Supervisor Phone: 8-759-2359 or 860 447-1791 x2359 Email: Hugh_E_McKenney(a)Dom.com ----------------------------------------- CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr

1 0

RE: [Respvr] Start Up sequence
by ALDAY, CLINT L 07 Jun '06

07 Jun '06

Non-trippable rods? Clint Alday 504-739-6331 -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of POHL, MATTHEW H Sent: Monday, June 05, 2006 7:22 PM To: RE Supervisors Subject: RE: [Respvr] Start Up sequence Fort Calhoun normally dilutes to within 100 ppm of ECC boron, then withdraws Shutdown Banks A & B, dilutes the remaining 100 ppm to ECC boron, withdraws the non-trippable rods, and then withdraws the Reg Rods. Matt Pohl (402)533-6820 -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of Hugh_E_McKenney(a)dom.com Sent: Thursday, May 18, 2006 8:19 AM To: respvr(a)retaqs.com Subject: [Respvr] Start Up sequence RE Supervisors, Does your plant normally start up (non RFO) by withdrawing shutdown banks first, then diluting the RCS to the estimated critical rod position (Cb) then withdrawing control rods to critical? or Does your plant normally start up by first diluting the RCS to the estimated critical rod position (Cb), then withdrawing shutdown banks, then withdrawing control rods to critical? Thanks Hugh McKenney Dominion Resources Services, Inc. Reactor Engineering Supervisor Phone: 8-759-2359 or 860 447-1791 x2359 Email: Hugh_E_McKenney(a)Dom.com ----------------------------------------- CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr

1 0

RE: [Respvr] Start Up sequence
by POHL, MATTHEW H 06 Jun '06

06 Jun '06

Fort Calhoun normally dilutes to within 100 ppm of ECC boron, then withdraws Shutdown Banks A & B, dilutes the remaining 100 ppm to ECC boron, withdraws the non-trippable rods, and then withdraws the Reg Rods. Matt Pohl (402)533-6820 -----Original Message----- From: respvr-bounces(a)retaqs.com [mailto:respvr-bounces@retaqs.com] On Behalf Of Hugh_E_McKenney(a)dom.com Sent: Thursday, May 18, 2006 8:19 AM To: respvr(a)retaqs.com Subject: [Respvr] Start Up sequence RE Supervisors, Does your plant normally start up (non RFO) by withdrawing shutdown banks first, then diluting the RCS to the estimated critical rod position (Cb) then withdrawing control rods to critical? or Does your plant normally start up by first diluting the RCS to the estimated critical rod position (Cb), then withdrawing shutdown banks, then withdrawing control rods to critical? Thanks Hugh McKenney Dominion Resources Services, Inc. Reactor Engineering Supervisor Phone: 8-759-2359 or 860 447-1791 x2359 Email: Hugh_E_McKenney(a)Dom.com ----------------------------------------- CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr _______________________________________________ Respvr mailing list Respvr(a)retaqs.com http://www.keffective.com/mailman/listinfo/respvr This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Respvr June 2006