For Seabrook

10% per hour from 20% to 90%
3% per hour above 90%
No restrictions below 20%

Paul Gurney
RE Supv
aburger@firstenergycorp.com

aburger@firstenergycorp.com Sent by: respvr-bounces@retaqs.com 02/20/2008 09:35 AM Please respond to "RE Supervisors"

To: respvr@retaqs.com cc: Subject: [Respvr] Ramp Rates for Normal Operations

What restrictions do PWRs place on ramp rates for normal operations (fuel
already conditioned to 100% power)? This would include extended reduced
power operation considerations, i.e. reduced power for X number of days
would require further ramp rate restrictions compared to a weekend load
swing.

Anthony (A.R.) Burger
Supervisor, Reactor Engineering
FENOC - Beaver Valley Power Station
Phone: (724) 682-4108
Cell: (724) 601-3224
FAX: (724) 682-4250
Email: aburger@firstenergycorp.com

-----------------------------------------
The information contained in this message is intended only for the
personal and confidential use of the recipient(s) named above. If
the reader of this message is not the intended recipient or an
agent responsible for delivering it to the intended recipient, you
are hereby notified that you have received this document in error
and that any review, dissemination, distribution, or copying of
this message is strictly prohibited. If you have received this
communication in error, please notify us immediately, and delete
the original message.
_______________________________________________
Respvr mailing list
Respvr@retaqs.com
http://www.keffective.com/mailman/listinfo/respvr