See Beaver Valley responses below.
Note that our FM Program applies to all areas that require FM controls, from turbine generator and electrical cabinets to the steam generators and SFP, so I will gear my responses to the SFP since it appears that you are most concerned with the SFP.
Anthony (A.R.) Burger Supervisor, Reactor Engineering FENOC - Beaver Valley Power Station Phone: (724) 682-4108 Cell: (724) 601-3224 FAX: (724) 682-4250 Email: aburger@firstenergycorp.com
From: "Kelliher, Andrew P" Andrew.Kelliher@cengllc.com To: "'pwrrm@retaqs.com'" pwrrm@retaqs.com Cc: "Knowles, Justin W" Justin.Knowles@cengllc.com, "Brown, Kenneth" Kenneth.Brown@cengllc.com, "Hellems, Ryan T" Ryan.Hellems@cengllc.com Date: 01/31/2012 03:32 PM Subject: [Pwrrm] Questions for comprehensive benchmark of FM team / training Sent by: pwrrm@retaqs.com
R.E. Ginna is working to determine the appropriate makeup of a foreign material retrieval team and the tools that should be available to them. We have developed the following questions:
1. When recovering FM, do you have station personnel, or contractors perform the work? Response - Most of the time the fuel vendor would perform recovery, however station personnel would be used for something simple such as a clearance tag floating on the surface or a security badge laying on the SFP floor in the cask pit area. If the item were fuel related, such as a fuel assembly lock tube or piece of grid strap we would tend to have the fuel vendor retrieve because of dose levels and familiarity with the objects and retrieval techniques necessary.
2. If station personnel, what departments (groups) make up the retrieval team? Response - Radiation Protection, Reactor Engineering/Refueling, and Maintenance/Construction
3. What tools/methods do you use to recover FM in the SFP? Response - We require that FM Recovery Plan be developed unless the item is immediately retrievable. We have used everything from duct tape on the end a long-handled pole to retrieval a security badge to air operated vise grips to retrieve a dropped lock tube. We have also used a Tri-Nuke and LUVS (Light Underwater Vacuum System) to retrieval/remove FM. Small debris baskets and debris canisters have been used to place items into and then place them into a larger SFP cell-sized debris canister.
4. What qualifications are required to be part of the retrieval team? Response - No special requirements for retrieval personnel other than that they are a qualified FME Worker having completed NANTel training and a Dynamic Learning Activity (hands-on training). a. Can you provide a copy of the training program qualification card? Response - I believe the NANTel training is available to everyone through INPO. Our Dynamic Learning Activity is a hands-on lab setting to demonstrate FM practices.
Your response to any of the questions above will be much appreciated. I understand that a lot of this is a duplicate of what was sent a few weeks ago but we?re really getting pushed to get some more benchmarking information.
Thank you in advance for you time,
-Andy
Andrew Kelliher Reactor Engineer R.E. Ginna Nuclear Power Plant Phone: (585) 771-3457
"I'm just sayin', I don't like fun." - Karl Pilkington
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP1_______________________________________________ PWRRM mailing list PWRRM@retaqs.com http://www.keffective.com/mailman/listinfo/pwrrm
----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.